Quick Answer
Panel hanging brackets are the steel or aluminium fittings that suspend and fix partition panels in office furniture and workstation dividers, and on a project they are chosen by matching five points before the order is placed: the bracket material, the panel the bracket must carry, the colour that matches the panel finish, the packing quantity per carton, and the installation method. In the published range, steel and aluminium-alloy brackets pack 100 to 200 pieces per carton and ship in black, white, grey and silver options, so a written decision on all five points keeps quotations comparable and installation consistent across the whole project.
Key Takeaways
- A panel hanging bracket is chosen against the panel it carries: material, colour match and fixing method come from the partition design, not from the hardware catalogue alone.
- The published range splits into steel (CH4502-4501) and aluminium alloy (CH4505, CH4507), plus the CHF-080 diamond bracket with a matching decorative cap.
- Packing differs inside one family — 200 pcs/CTN on the CH4502-4501 and CH4505, 100 pcs/CTN on the CH4507 — so carton planning belongs in the order, not after it.
- Office screens are a standardised product field: EN 1023-2:2000 specifies the mechanical safety requirements of office screens, and ISO/TC 136 maintains test methods for furniture hardware.
- Comparing suppliers against a written bracket specification — material, colour, packing quantity and fixing — is what makes quotations comparable like for like.
What Are Panel Hanging Brackets in a Partition Project?
A panel hanging bracket is the fitting that carries a partition panel between workstations: it fixes to the desk frame or the neighbouring panel and suspends the divider panel so the surface stays flush and the panel can be removed for reconfiguration. In the catalogue the family sits inside screen and partition hardware alongside the aluminium screen clamps that grip the panel edge and the tracks that hold the line of panels in place.
The office partition hardware selection guide covers the wider partition programme; this article stays on the decision a buyer makes when the panel support has to be ordered: which bracket construction, which colour, and how many cartons the project actually consumes.
How Do You Compare Steel and Aluminium Panel Hanging Brackets?
Compare the four published constructions against the panel system, not against each other in the abstract. The CH4502-4501 panel hanging bracket is the steel option: a steel bracket for fixing and suspending partition panels in office furniture and workstation dividers, offered in black, white, gray and more, packed 200 pcs per carton. Steel is the conventional choice where the specification simply names a steel support and the finish is a neutral black or white.
The aluminium versions divide the rest of the range. The CH4505 panel hanging bracket is an aluminium alloy bracket, documented under models CH4505/CH4506, in black, white and shimmering silver, also 200 pcs per carton. The CH4507 panel hanging bracket is likewise aluminium alloy, in black, brilliant white and gray, but packed 100 pcs per carton — half the carton quantity of its sibling, which matters the moment container space is planned.
The CHF-080 diamond hanging bracket is the visible-face option: a diamond-shaped aluminium body (CHF-080-1) with a matching ABS cap (CHF-080-2) in BMW Gray, black and white, each packed 200 pcs per carton. It is specified where the bracket itself is part of the appearance of the partition rather than a hidden fixing, which is why the cap colour is a sample-round decision.
For buyers the comparison is therefore a table with four columns — material, colour options, packing quantity, exposed or concealed face — filled from the product pages before prices are requested, so that every supplier quotes the same construction.
What Should Buyers Confirm Before Ordering Panel Hanging Brackets?
Colour comes first because it is the only bracket attribute end users see. The range offers black, white, gray, brilliant white, shimmering silver and BMW Gray depending on the model, and several models note further colours available; where a bracket sits behind a fascia, a standard colour is enough, and where it is exposed — as with the CHF-080 cap — the colour should be written as a match to the panel finish rather than as a preference. Custom colours on an OEM programme add a colour-approval step that standard colours do not require.
Packing quantity comes second. Within one bracket family the published figures run from 100 to 200 pcs per carton, and a project that needs 4,000 brackets consumes either 40 cartons or 20 depending on the model chosen — a difference that changes the container plan, the per-unit freight and the warehouse handling at destination. The packing figure per model belongs on the purchase order, exactly as it does for any other bulk hardware line.
Third, confirm the panel side of the equation: the panel thickness and mounting the bracket must accept, whether panels are fixed or suspended on the project, and the quantity per workstation so the bracket count follows the furniture layout rather than a round-number guess. A written line — model, colour, quantity, pcs per carton — is the whole specification for most bracket orders.
What Should You Ask a Panel Hanging Bracket Supplier?
Ask four questions before the quotation is accepted. First, which material the offered bracket actually is — steel or aluminium alloy — because the published range contains both and the difference shows up in the finished partition description. Second, whether the colour requested is a documented standard for that model or a custom match, and what colour proof travels with the sample.
Third, how the bracket and the panel assembly are checked. Office screens are a standardised product field in Europe: EN 1023-2:2000, Office furniture — Screens — Part 2: Mechanical safety requirements, published by CEN and listed by national standards bodies such as AFNOR, specifies the mechanical safety requirements of office screens divided into general safety requirements and structural safety requirements, with the corresponding test methods described in EN 1023-3. Asking which method the assembly is checked against turns a photograph into a comparable answer.
Fourth, which component-level test methods the supplier works to. Furniture hardware is a recognised standardisation field at ISO level: the scope of ISO/TC 136, Furniture covers requirements for specific components such as hardware together with the test methods for them, and its WG 9 works specifically on hardware for furniture — methods of test. A supplier who can name the methods it works to is easier to audit than one who can only send pictures.
What Mistakes Raise the Cost of a Bracket Order?
Bracket orders are small lines inside a large partition order, which is exactly why bracket mistakes are cheap to prevent and expensive to discover at installation.
- Ordering a bracket colour as a preference instead of a panel-finish match, so thousands of installed brackets miss the partition palette.
- Mixing steel and aluminium models inside one order line, which makes returned prices impossible to compare and complicates the finished-goods description.
- Leaving the packing quantity out of the order when the same family packs 100 and 200 pcs per carton, so the container plan is built on a guess.
- Skipping the sample round on a visible bracket such as the CHF-080, where the cap colour is an appearance decision, not a detail.
Each of these is closed by the same document — a short written specification sent with the RFQ — rather than by a better price.
Buyer Checklist
- Name the partition panel the bracket carries and whether panels are fixed or suspended on the project.
- Choose the construction: steel CH4502-4501, aluminium CH4505 or CH4507, or the CHF-080 diamond bracket with cap.
- Write the colour as a match to the panel finish and flag any custom colour for sampling.
- Record the packing quantity per carton for the chosen model before planning freight.
- Ask which mechanical-safety and hardware test methods the assembly is checked against.
- Approve a physical sample of the exact specified bracket before mass production, then release the order.
Conclusion
Choosing panel hanging brackets for a project is a five-line decision — material, panel, colour, packing quantity, installation method — written down before prices are compared. Fix those five, and every quotation that comes back describes the same product, the container plan follows the carton figures, and the installed partition matches the approved sample. Buyers planning a partition programme can send the bracket specification to Natlo Hardware for a quotation.
Sources
- EN 1023-2:2000 Office furniture — Screens — Part 2: Mechanical safety requirements (CEN; national listing AFNOR Editions): https://www.boutique.afnor.org/en-gb/standard/nf-en-10232/office-furniture-screens-part-2-mechanical-safety-requirements/fa036790/17635
- ISO/TC 136 Furniture — standardization covering performance, safety and dimensional requirements, requirements for specific components such as hardware, and test methods (WG 9: Hardware for furniture — Methods of test): https://www.iso.org/committee/52448.html
Frequently Asked Questions
These are the questions furniture manufacturers and project buyers raise most often when panel hanging brackets are specified for a partition order.
Related Products
Frequently Asked Questions
What is the difference between a panel hanging bracket and a screen clamp?
A panel hanging bracket suspends and fixes the partition panel itself, carrying its weight between workstations — the CH4502-4501, CH4505 and CH4507 in the published range are all panel hanging brackets. A screen clamp, such as the CH1221 aluminium screen clamp, grips and positions the panel edge on the desktop or frame without being the main load-bearing carrier. A partition project normally consumes both, so the two are specified as separate lines with their own quantities and packing figures.
Which colours are available for panel hanging brackets?
Documented colours in the range are black, white and gray on the steel CH4502-4501; black, white and shimmering silver on the aluminium CH4505; black, brilliant white and gray on the CH4507; and BMW Gray, black and white on the CHF-080 diamond bracket with its ABS cap. Several models note further colours available, and custom colours can be run for OEM programmes. The colour should be written as a match to the panel finish, and any custom colour should be approved as a physical sample before mass production.
How many panel hanging brackets are packed per carton?
Published packing quantities are 200 pcs per carton for the CH4502-4501 steel bracket, 200 pcs per carton for the CH4505 aluminium bracket, 100 pcs per carton for the CH4507 aluminium bracket, and 200 pcs per carton each for the CHF-080 bracket body and cap. Because the spread inside one family is a factor of two, the packing figure per model belongs on the purchase order before freight is planned.
Can panel hanging brackets be customized for an OEM programme?
Yes. The range already documents multiple colour options per model, and Natlo Hardware produces screen and partition hardware in Foshan, Guangdong, with custom colour available on OEM programmes. A custom colour adds one step a standard colour does not have: a colour sample approved in writing before mass production, which is why it should be flagged on the order as its own line rather than assumed inside a standard-colour price.
What should buyers approve before a bracket order runs?
The buyer should approve a physical sample of the exact specified bracket — material, colour and, on exposed fittings such as the CHF-080, the cap colour — before mass production, together with the written order line confirming model, quantity and pcs per carton. Where a custom colour is involved, the sample round is also where the colour match to the panel finish is settled, which is far cheaper than correcting after the brackets are installed.